
The studio shots show this build with new light and a new background; its details (screens, labels, mesh and perforation) are taken from the photograph. Image processing can change small details, so the machine may differ slightly from the pictures.
Svartis
Mirror front. Two large air intakes.
Lian Li LANCOOL 217 INF with infinity fans behind its mirror front and 360 mm liquid cooling with a 6″ screen on the pump.
- Ryzen 7 9850X3D
- RTX 5070 Ti 16 GB
- 360 mm liquid cooling
from NOK 34,999
View the machinesThe parts and why we chose them
The same in both machines of this edition. The figures are the makers'.
- Case
Lian Li LANCOOL 217 INF
- A mirror front with infinity fans
- The front dust filters come off for cleaning
- 482 × 238 × 503 mm, tempered glass
- Cooling
Phanteks Glacier One 360M25 LCD
- 360 mm liquid cooling
- 6″ IPS screen on the pump, 1480 × 720
- Three M25 G2 fans, 30 mm thick
- Fans
6 vifter / 6 fans
- 2 × 170 mm ARGB in at the front, behind the infinity mirror
- 3 × 120 mm M25 G2 on the radiator in the roof
- 1 × 140 mm out at the back
- Processor
AMD Ryzen 7 9850X3D
- 96 MB of L3 cache with 3D V-Cache
- 8 cores and 16 threads (Zen 5)
- Up to 5.6 GHz
- Graphics card
Gainward GeForce RTX 5070 Ti Phoenix-S GS 16 GB
- 16 GB of GDDR7 on a 256-bit bus
- Factory overclocked: 2482 MHz boost
- 3 × DisplayPort and 1 × HDMI
- Motherboard
Gigabyte B850 GAMING X WIFI6E
- 2.5 Gbit wired networking, Wi-Fi 6E and Bluetooth 5.3
- Three M.2 slots, one of them PCIe 5.0
- Four DDR5 slots — two free for more memory
- Memory
Corsair Vengeance RGB DDR5-6000 32 GB (2 × 16 GB) CL38
- 32 GB in two modules, dual channel
- DDR5-6000 profile, CL38
- Addressable RGB light bar and an aluminium heat spreader
- Storage
Kingston NV3 1 TB
- PCIe 4.0 × 4: up to 6000 MB/s read and 4000 MB/s write
- 1 TB, rated endurance 320 TBW
- Power supply
Corsair RM750e (2025) · Gold
- Gold efficiency (Cybenetics Gold): less power turns into heat, so it stays cool and quiet · 750 W
- ATX 3.1 with its own 12V-2x6 cable to the graphics card
- Modular cables — only the ones it needs
Explore the machine
The model is an illustration closely resembling the product. Turn it, take it apart, and see the airflow: cool air in, warm air out. The illustration follows the fans fitted in the machine; its temperatures are estimates, not measurements.

RGB lighting
Try the lighting effects on the machine. You can change colours and effects yourself at any time.
Lights up: fans · memory · graphics card · cooling · case
Choose your Svartis
Each machine has its own page with its status, price and full specification.

RF-10003
Gungnir · A mirror front with infinity fans and a 6″ screen on the pump
Our best buy- Graphics card
- Gainward GeForce RTX 5070 Ti Phoenix-S GS 16 GB
- Processor
- AMD Ryzen 7 9850X3D
- Memory
- Corsair Vengeance RGB DDR5-6000 32 GB (2 × 16 GB) CL38
- Storage
- Kingston NV3 1 TB

RF-10004
Gungnir · A mirror front with infinity fans and a 6″ screen on the pump
Our best buy- Graphics card
- Gainward GeForce RTX 5070 Ti Phoenix-S GS 16 GB
- Processor
- AMD Ryzen 7 9850X3D
- Memory
- Corsair Vengeance RGB DDR5-6000 32 GB (2 × 16 GB) CL38
- Storage
- Kingston NV3 1 TB
Questions and answers
Which machine will I receive?
You choose one of the numbered machines below. Each has its own page with its status, price and full specification, and that is exactly the one you get.
Are the pictures of the real machine?
Yes. The studio shots are photographs of the machine we built, with new light and a new background; its details — screens, labels, mesh and perforation — are taken from the photograph. Where a panel was off for the photo, the caption says so.
Are the 3D model and the airflow measured?
No. The 3D model is a form study of the real parts, and the airflow is an illustration based on the fans fitted in the machine. Its temperatures are estimates, not measurements.

